Low Cost Nomex Coveralls Style CNC2

As low as $121.99 Regular Price $152.50
In stock
SKU
CNC2

Product Description

4.5 oz Nomex Contractor Coveralls from Bulwark

Fabric

Nomex Contractor Coveralls are made of Flame resistant, 4.5 oz plain weave NOMEX® IIIA

 

Features

- Closure is concealed, with two-way taped brass zipper, gripper at top of zipper and at neck
- Neck protection with one-piece topstitched, lay flat collar
- Hemmed sleeves prevents snagging and fraying
- Two set-in front pockets, one chest pocket, two patch hip pockets stores handy essentials
- Rugged safety stitched construction with felled inseams secures cloth joints for durability.
- Keeps fresh air flowing with side vent opening
- Numeric sizing for more options of sizing for the right fit

Arc Rating 4.1 ATPV


Standards

Certified by Underwriters Laboratories to meet the requirements of NFPA® 2112 Standard on Flame Resistant Garments for Protection of Industrial Personnel Against Flash Fire, 2012 Edition

NFPA 2112
NFPA 70E

Applications

Nomex Contractor Coveralls Style CNC2 are suited for Petrochemicals, utilities, military applications, auto racing, volunteer and professional fire fighters.
Flame Resistance
NOMEX® is inherently flame resistant and this property can not be degraded by laundering.

Flame Resistance

NOMEX® is inherently flame resistant and this property can not be degraded by laundering.

 

SIZING CONVERSION CHART 

Size 38 40 42 44 46 48 50 52 54 56 58
Chest 36 38 40 42 44 46 48 50 52 54 56
Stomach* 36 38 40 42 44 46 48 50 52 54 56
Hips* 36 38 40 42 44 46 48 50 52 54 56
Height 5'8"-5'11½" Regular 6'0"-6'3" Tall

 

 

* These refer to actual body measurements.
Chest size is taken at the fullest point of the chest, keeping tape under arms and around shoulder blades. This measurement should be taken as actual body measuremnets with a light shirt on as this style of garment is designed to be worn over clothes
*
Please note that you must take the largest circumference measurement be it the chest, stomach or hips.
Please phone customer service at
1-888-440-4668 if you require assistance.

 

To ensure protection for the wearer it is important to get the Nomex Coveralls style CNC2 in the right size. To get Nomex CNC2 coveralls in the right size, take the measurements of the following body parts in inches - chest, stomach and hips. As the protective garment is meant to be worn over clothes, make sure you are wearing a light shirt when taking the measurements.  Do note that the chest should be measured at the fullest point, just under the arms and around the back shoulder blades.

After taking the measurements, take the largest measurement, be it the chest, stomach, or hips then add two inches. For example, if the chest measures 46 inches, the stomach 40 inches and the hips 42 inches, the right size would be 48.

For the height, there are two options available for the CNC2 Nomex coveralls - regular and tall. Those whose height measures between 5’8” and 5’11 ½” should get the regular length and those who stand between 6’0” and 6’3” would fall under the tall category. 


The CNC2 Nomex coveralls run small. If you are concerned about the fit, it is suggested to go one size up. This should give you ample room to move when performing tasks. As people do come in different proportions, the sizing chart suggestions are not always 100% accurate.

As for choosing whether to purchase the Regular or the Tall sizes, it should be easier to determine which would fit. The Regular coveralls should fit someone who stands between 5’8” and 5’11 ½”. The Tall height will fit someone whose height falls between 6’0” and 6’3”.

 

 

Write Your Own Review
You're reviewing:Low Cost Nomex Coveralls Style CNC2
Your Rating