WH Salisbury
PRO-WEAR™ Electrical Arc Flash 
Jackets and Coats

    Click on image above to be taken to product description
and prices

WH Salisbury Pro-Wear™

    The following product line of the electric arc protective jackets and coats from WH Salisbury brand named PRO-WEAR™ are available in the styles shown below and are designed to be worn with the Pro-Shield and the Pro-Hood. These jackets and coats provide flash protection from electrical arcs ranging from 11 cal/cm² to 100 cal/cm² which will comply with all hazard risk categories up to and including HRC 4 .
    Indura Ultra Soft is used in the construction of the jackets and provides breath ability and comfort due to the cotton fabric and the coats are available in a wide range of sizes and can be ordered custom made. The arc flash protective jackets are designed to incorporate the attached hood and interfaces with the Pro-Shield and the Pro-Hood accessories.  
    The Salisbury Pro-Wear series meets the current ASTM F1506 and NFPA 70E standards and are utilized by electricians, linesmen and any personal that are working on or may be exposed to an electric arc blast.   

    Note: Always perform a risk hazard assessment when working on or near electrical equipment to determine the arc flash protection required. It may be that the arc potential of a possible electric flash blast could be higher then the actual cal rating of a certain jacket or coat so it always advised to perform a risk hazard assessment for each and every job function where there may be exposure to an electric arc. 

    For more information on determining your risk hazard assessment you can access the: 
Duke Power's Heat Flux Calculator.  

- 11 cal/cm² to 100 cal/cm² protection
- Indura Ultra Soft® material
  Excellent breathability and cotton comfort
- All Salisbury PRO-WEAR™ sewn with Nomex® thread
- 32" long and sizes S, M, L, XL, 2XL, 3XL available from stock
- Other sizes available by special order
- Jacket design incorporates attached hood and interfaces with Salisbury PRO-SHIELD™
- Coats designed to interface with Salisbury PRO-HOOD™
- Meets current ASTM F1506 and NFPA 70E standards

Arc Rating 11 cal/cm² to 100 cal/cm²

Applications

Salisbury PRO-WEAR™ is designed for arc flash protection hazard risk category 2 through 4. 

Arc Protection

10 cal/cm² 11 cal/cm² to 100 cal/cm² protection

JSHV1132BL

Click image to enlarge  

11 cal/cm², 9.0 oz/yd material, hooded jacket with hook and pile closure, interfaces with Salisbury PRO-SHIELD, Nomex wristlets, navy blue

                  
Prices for Pro Wear JSHV1132BL Flash Jacket 

20% restocking fee on all returns and exchanges

ACC1132BL

Click image  to enlarge

11 cal/cm2, 9oz./yd2 material, expansion back for added comfort, FR hook and pile front closure, Nomex® wristlets, navy blue

                  
Prices for Pro Wear ACC1132BL Flash Jacket 

20% restocking fee on all returns and exchanges

ACC2032BL

Click image  to enlarge

20 cal/cm2, 13oz./yd2 material, expansion back for added comfort, FR hook and pile front closure, Nomex® wristlets, navy blue

                  
Prices for Pro Wear ACC2032BL Flash Jacket

20% restocking fee on all returns and exchanges

ACC3132RB

Click image  to enlarge    

31 cal/cm2, 2 layer (9oz./yd2 & 7oz./yd2) material, expansion back for added comfort, dual stage front closure with plastic zipper and FR hook and pile storm flap, Nomex® wristlets, royal blue

                  
Prices for Pro Wear ACC3132RB Flash Jacket 

20% restocking fee on all returns and exchanges

ACC4032GY

Click image  to enlarge

40 cal/cm2, 2 layer (9oz./yd2 & 13oz./yd2) material, expansion back for added comfort, dual stage front closure with plastic zipper and FR hook & pile storm flap, Nomex® wristlets, gray

                  
Prices for ACC4032GY Flash Jacket 

20% restocking fee on all returns and exchanges

ACC5532GY

Click image  to enlarge

55 cal/cm2, 2 layer (13oz./yd2 & 13oz./yd2) material, expansion back for added comfort, dual stage front closure with plastic zipper and FR hook & pile storm flap, Nomex® wristlets, gray

                  
Prices for ACC5532GY Flash Jacket 

20% restocking fee on all returns and exchanges

ACC7532GY

Click image  to enlarge

75 cal/cm2, 3 layer (7oz./yd2 & 2 - 13oz./yd2) material, expansion back for added comfort, dual stage front closure with plastic zipper and FR hook & pile storm flap, Nomex® wristlets, gray

                  
Prices for ACC7532GY Flash Jacket 

20% restocking fee on all returns and exchanges

ACC10032TW

Click image  to enlarge

100 cal/cm2, 4 layer (2 - 7oz./yd2 & 2 - 13oz./yd2) material, expansion back for added comfort, dual stage front closure with plastic zipper and FR hook & pile storm flap, Nomex® wristlets, TuffWeld

                  
Prices for ACC10032TW Flash Jacket 

20% restocking fee on all returns and exchanges

We would be happy to talk about your safety protection guidelines that are appropriate for your industry.

Please feel free to call us at:

1-888-440-4668

Ask for Terry

HOME  :  SITE MAP 

    Nomex Coveralls¦ ¦ Nomex Jackets ¦ Nomex Overalls ¦
¦ Indura Flame Resistant Safety Clothing ¦ Arc Flash Protection Manufacturers ¦
70E Compliance | Arc Flash News | Bulwark Protective Apparel |  
WH Salisbury Arc Flash Protection |
Arc Flash Protective Head and Face gear | Salisbury PRO-WEAR™ Flash Jackets and Coats WH Salisbury PRO-HOOD™ Electrical Arc Flash Protective Hoods 
Rubber Insulating Gloves Protection

Safety Protection Warehouse
Email: webmaster@coverallsale.com
Phone Numbers: (250)639-1670
1-888-440-4668

Webpage Created By Terry Smeader